Mainly used in industrial automation

1.25mm door from the ground

2.- 2.5mm thick mounting plate with 20mm wide U-shaped curved edge on both sides, which makes the mounting plate stronger and easier to carry.

3.-Three cable introduction cover plates at the bottom of the box, can be replaced with each other, easy to move, easy to introduce the cable, easy to open the hole into the wire-grounding screw warp wire

4.-Weight-bearing hinge, easy to install, easy to change the cabinet door, the door can be opened 130 ° -Plastic sliding guide can be used to push the mounting plate into the box from the front through the guide rail

5.-Sturdy rectangular frame not only can strengthen the front door, but also can be used to fix the installation of electrical components (with the use of door mounting crossbar). The back panel can be easily installed and fixed with screws. Can also change the box door, connecting rod fork lock, upper, middle and lower three points locking cabinet door. Seal ring: polyurethane foam sealing tape, to ensure the level of protection. Box edge and seal ring with the prevention of water and dust into the cabinet. (Single door) left and right interchangeable door design, easy to use - standard modulized installation hole design, easy to install. Internal light for easy installation and testing. File pocket for easy field work

6.-Mounting beam, without the use of mounting plates can also be installed inside the cabinet. Fan and filter, to ensure ventilation inside the cabinet, protection level IP54- base, disassembly and installation are convenient- double mounting plate, large installation capacity- door mounting strip, easy to install